爱的色放在线观看,国产精品美女一区二区三区,欧美性生交XXXXX久久久,天天做天天爱夜夜爽


免費注冊快速求購


分享
舉報 評價

德國ME3030B 低頻電磁輻射檢測儀

參考價面議
具體成交價以合同協議為準

該廠商其他產品

我也要出現在這里

德國ME3030B低頻電磁輻射檢測儀ME-3030B產品參數:?ME3030B是一款高精度數字式低頻電磁場強度分析儀,它是一款用于檢測、分析低頻磁場和電場的高精度儀器,采用創新的電路元件,確保所有設備性能在條件仍然具有非常可靠的性能,內置超高靈敏度電/磁場復合傳感器,可對各種低頻環境中存在電、磁場輻射進行精確檢測

詳細信息 在線詢價

ME-3030B總代理

德國ME3030B 低頻電磁輻射檢測儀ME-3030B產品參數
?ME3030B是一款高精度數字式低頻電磁場強度分析儀,它是一款用于檢測、分析低頻磁場和電場的高精度儀器,采用創新的電路元件,確保所有設備性能在條件仍然具有非常可靠的性能,內置超高靈敏度電/磁場復合傳感器,可對各種低頻環境中存在電、磁場輻射進行精確檢測。 GIGAHERTZ所有設備均在德國生產和校準,有效保證設備穩定、優秀的性能。ME3030B可用于測量電器、工業設備、感應爐、變壓器、電力系統設備等低頻領域電磁輻射。

ME3030B?特點:

1. 便攜式設計,重量輕,可輕松單手操作,便于移動或現場測量

2. 采用創新的電路元件,確保所有設備性能在條件仍然具有非常可靠的性能

3. 的線性度下降和級別的限制(號:DE 和DE)

4. 內置高精度電/磁場復合傳感器,靈敏度高,響應快速

5. 充分補償的頻率響應,提供確的測量結果

6. 實時顯示液晶顯示屏,直接顯示測量的頻率范圍內的總暴露值

7. 內置信號強度提示揚聲器(提示音大小與電磁場強度成正比),有效幫助識別信號源及快速定位信號位置

8. 低電量警示及閑時自動關機功能

ME3030B?應用:

1. 環境電磁輻射監測

2. 工作場所的電磁場安全監測

3. 國防電子設備的電磁安全檢測

4. 航空航天設備電磁環境監測

5. Traction power(牽引電力)

6. 電源線及電纜

7. 變壓器

8. 電力系統及諧波

9. 各種工作頻率達2kHz附近的家用、辦公室、工業用電器電磁檢測等

ME3030B?規格:

傳感器:電/磁場復合傳感器(1D)

頻率范圍:16Hz~2kHz(自動補償,優于-2 dB)

測量范圍:磁場:1 ~1999 nT

         電場: 1 ~ 1999V/m (典型)

精度:2% @ 50/60 Hz

探測器:RMS

電源:9V電池,工作時間約24~36小時

尺寸:70mm×175mm×30mm

重量:410g


LF ANALYSER ME3030B

The cheapest field strength meter on the market for the serious measurement of EMF/LF electrosmog caused by household power supply and appliances, high-voltage power lines, electric rail etc.Basis for mitigation and a control of their effectiveness.

Frequency range: 16 Hz - 2 KHz (compensated, better than -2 dB)

Even this starter device meets the high quality standards and common advantages of whole series:

  • The reading s the total pollution directly in the entity corresponding to the building biology standard values - without any calculation required.
  • The "Geiger counter effect" helps to identify areas of increased LF stress.
  • The included detailed measurement instruction enables the user to perform relevant measurements of EMF – even without technical expertise. With the help of this instrument you can spot - even obscured - sources of LF pollution.
  • Also the manual includes the recommendations for limiting values according to the standard of building biology SBM, which allow for a meaningful assessment of the personal level of EMF pollution.
  • Many patents have been granted to us, the devices have tenthousandfold proven their reliability, and have n to be leading-edge in their price categories.

Some important technical details:

  • It measures magnetic AND electric fields based on scientifically accepted measuring methods and with high sensitivity (display resolution: 1 nT or 1 V/m).
  • The device is fully frequency compensated, that is not only the 50/60 Hz mains frequency (eg. high-voltage lines), but also the 16.7 Hz of the traction current overhead lines and natural harmonics 2 kHz are n on without distortion.
Technical Data
Frequency range:16 Hz - 2 KHz (compensated, better than -2 dB)
Measurement range:Magnetic flux density (unidimensional): 1 - 1999 nT 
Electric field strength: 1 - 1999 V/m
Precision:+/- 2 %, +/- 14 digits @ 50/60 Hz
Sensor:E-field sensor for electrical LF- fields 
H-field sensor for magnetic LF-fields (one-dimensional)
Audio analysis:acoustic signal proportional to the field strength with "Geiger-counter-effect"
Signal rating:RMS
Power supply:9 Volt alkaline manganese battery (included), average operation time 24-36 hours 
Low-Batt. indication
Auto-power-off


同類產品推薦


提示

×

*您想獲取產品的資料:

以上可多選,勾選其他,可自行輸入要求

個人信息: