PTL軟線柔性試驗機
產品名稱：PTL軟線柔性試驗機
產品型號：F43.11
產品用途：通過來回彎折來測試軟電線和電纜的機械壽命。
符合標準：根據IEC60065/2005-12&16.3b)表19,
IEC60227-2/2003-04&3.1.2表1圖1,
IEC60245-2/1998-04 &3.1.2表1圖1,
VDE0472部分603/1989-07&4.8and&4.12圖5等相關標準
Standard out fit
1 carrier, with recirculating-ball bearing bushes running be-low the table-board on two cylindrical guide ways, with mounted travelling boom,
1 geared motor with chain and connecting rod to drive the carrier with a speed
0.33 m/s ± 5%,
2 supports for the side pulleys,with grooves for the adjust-ment of the pulleys,
1 set of bolts nuts and ball bearings for fastening the pulleys,
1 set of loading weights, de-tails see F 43/3
1 set of restraining clamps as stops to limit the travel of the sample,
1 set of terminals for connec-tion of the samples,
1 base, with one front and two side doors, with splited table-board, with shelf for accessories,
1 protecting hood with panes of polycarbonate glass, disburdened by gas springs, with elec-tric drive to open and to close,
3 door contact switches for the side doors and for the protecting hood,
1 electrical current load unit, details see F 43/3,
1 electrical switching and control unit with main switch, lockable switch EMERGENCY-OFF,preset counter as well as push buttons I and O.
Design: Steel construction, papyrus-white structure varnished with stone grey coloured high-lights, smaller steel parts burnished or nickel-plated, cylindrical guide ways hardened and ground,for operation at 3 x 400 V 50 Hz or 60 Hz
Article No.: F 43.11
